11
If trap dial-out is desired:
1. Set up the modem call directory phone numbers.
Main Menu
→
Control
→
Modem Call Directories
2. Select the desired Directory Number (A for Alarm, or 1– 5 for an alternate trap
destination if the A does not answer).
3. Enter the phone number(s). Use valid characters only:
– ASCII text
– B for blind dialing
– W for wait for dial tone
– P for pulse dialing unless B specified
– T for tone dialing unless B specified
– Space, underscore ( _ ), comma ( , ) for a 2-second pause, and dash (–)
readability characters
4. Save the phone number(s).
5. Select SNMP Traps.
Configuration
→
Management and Communication
→
SNMP Traps
– Enable SNMP Traps.
– Assign SNMP Trap Managers.
– Specify the IP address of the NMS that traps will be sent to when dialing out.
– Select desired trap categories.
6. Save the configuration and return to the Management and Communication menu.
7. Select Dial-Out and minimally, enable Trap Dial-Out.
8. Save the configuration.
