Paradyne ACCULINK 3150 Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 234

Paradyne ACCULINK 3150 Скачать руководство пользователя страница 73

5. Security

3150-A2-GB24-10

March 2001

5-7

Enabling/Disabling the Front Panel

You can enable or disable the display of information on the front panel. This feature
is useful for ensuring that other users do not inadvertently change the device’s
configuration options while you are using an external device (e.g., a PC or async
terminal). The factory default is Enable.

The FP Access feature is not available (and is not displayed) on carrier-mounted
CSUs.

NOTE:

If you disable the front panel, be sure not to alter the configuration options for
using an external device (e.g., a PC or async terminal). If this happens, you
lose the ability to communicate with the device. You will need to contact your
service representative.

Procedure

To enable or disable the front panel:

1. From the top-level menu screen, select Cnfig.

2. Select the configuration option set to be copied into the Edit area by using the

appropriate Function key. Use the scroll keys, if necessary.

3. Select Edit.

4. Select User.

5. Press F1 (Next) until the FP Access configuration option appears.

6. Press F2 to enable the front panel or F3 to disable the front panel.

F1

F2

F3

FP Access:
Next Enab Disab

«
...
71
72
73
74
75
...
»

Содержание ACCULINK 3150











































































































































































































































Отзывы:

Нет отзывов