Paradyne ACCULINK 3150 Скачать руководство пользователя страница 117

Страница: 117 / 234

8. Testing

3150-A2-GB24-10

March 2001

8-17

Displaying CSU Test Status

Use the Test Status command to display the active tests for the CSU. Status
messages that can display on the front panel LCD are listed in

Table 8-3, Test

Status Messages

Procedure

To display test status:

1. From the top-level menu screen, select Stat.

2. From the Status screen, press the

key until the TStat selection appears on

the screen.

3. Select TStat.

The Test Status screen appears showing you what tests are active for the
CSU.

Table 8-3.

Test Status Messages

Message

Description

No Test Active

No tests are currently active.

LLB Test Active

The network interface is in Line loopback.

PLB Test Active

The network interface is in Payload loopback.

DLB Test Active

The DTE port is in DTE loopback.

RLB Test Active

The DTE port is in Repeater loopback.

QRSS on Net

A QRSS test pattern is being sent on the network interface.

1–8 Test Active

A 1-in-8 test pattern is being sent on the network interface.

Mon QRSS, Net

A QRSS test pattern is being monitored on the network
interface.

DLB Test, Extrn

The DTE port is being held in DTE loopback by the external
contact.

Lamp Test Active

The Lamp test is currently active.

Status:
STest Perf TStat

Содержание ACCULINK 3150











































































































































































































































Результаты поиска

Содержание ACCULINK 3150

Отзывы:

Paradyne ACCULINK 3150, Руководство оператора, Страница: 117 / 234

Результаты поиска

Содержание ACCULINK 3150

Отзывы: