Paradyne ACCULINK 3150 Скачать руководство пользователя страница 134

Страница: 134 / 234

C. Configuration Options

C-12

March

2001

3150-A2-GB24-10

Com Rate: 9.6
Next 1.2 2.4 4.8 9.6 14.4 19.2 38.4 Prev

Communication Port Rate. Configures the bit rate for the communication port.

1.2

–

Sets the bit rate to 1200 bps (for asynchronous operation only).

2.4

–

Sets the bit rate to 2400 bps.

4.8

–

Sets the bit rate to 4800 bps.

9.6

–

Sets the bit rate to 9600 bps.

14.4

–

Sets the bit rate to 14,400 bps.

19.2

–

Sets the bit rate to 19,200 bps.

38.4

–

Sets the bit rate to 38,400 bps. This rate is not supported for carrier-mounted

CSUs.

NOTE: This configuration option is not available if the communication port is configured
for synchronous operation and the clock source is external.

Char Length: 8
Next 7 8 Prev

Communication Port Character Length. Configures the character length (7 or 8 bits) for
the communication port.

NOTES:

– This configuration option must be set to 8 if the communication port is used as the

network communication link.

– This configuration option is not available if the communication port is configured for

synchronous operation.

CParity: None
Next None Even Odd Prev

Communication Port Parity. Configures the parity (none, even, or odd) for the
communication port.

NOTE: This configuration option is not available if the communication port is configured
for synchronous operation.

CStop Bits: 1
Next 1 1.5 2 Prev

Communication Port Stop Bits. Configures the number of stop bits (1, 1.5, or 2) for the
communication port.

NOTE: This configuration option is not available if the communication port is configured
for synchronous operation.

Ignore DTR: No
Next Yes No Prev

Communication Port Ignore DTR State. Specifies whether the CSU ignores the state of
the Data Terminal Ready (DTR) input to the communication port.

Yes

–

DTR is ignored.

–

DTR is not ignored.

NOTE: This configuration option is not available if the communication port is configured
for synchronous operation.

Table C-4.

User Interface Configuration Options (6 of 10)

Содержание ACCULINK 3150











































































































































































































































Результаты поиска

Содержание ACCULINK 3150

Отзывы:

Paradyne ACCULINK 3150, Руководство оператора, Страница: 134 / 234

Результаты поиска

Содержание ACCULINK 3150

Отзывы: