Paradyne ACCULINK 3150, Руководство оператора, Страница: 36 / 234

3. Using the Front Panel
3-8
March 2001 3150-A2-GB24-10
Displaying LED Conditions
The same conditions monitored by the front panel LEDs can also be monitored by
the LED command. This command is most useful when the CSU is being
accessed remotely (see
Appendix H,
Front Panel Emulation
). When using Front
Panel Emulation, no LEDs are shown on the PC’s screen; you must use the Stat
command procedure described below to get LED information.
Procedure
To display LED conditions on the front panel screen:
1. From the top-level menu screen, select Stat.
2. From the Status screen, press the key until the LED selection appears on
the screen.
3. From the Status screen, select LED.
The LED Display screen lists the LED signals, two at a time, on the second
line. A vertical bar at the left of the LED name indicates the condition is ON,
while an underscore indicates the condition is Off.
4. Use the and keys to scroll LED names onto the screen.
F1 F2 F3
Status:
TStat ENET LED
F1 F2 F3
LED Display:
_Test _NetSig