manualshive.com logo in svg

Paradyne ACCULINK 3150, Руководство оператора, Страница: 171 / 234

Поделиться
Скачать
Paradyne ACCULINK 3150 Скачать руководство пользователя страница 171

F. SNMP MIB Objects

3150-A2-GB24-10

March 2001

F-3

System Group, MIB II

The System Group objects are fully supported by the CSU. The following sections 
provide clarification for objects contained in the System Group where it is not 
otherwise clear how the object definition in MIB II is related to the CSU. Objects 
not mentioned are supported as stated in the MIB.

System Group – “sysDescr” Object (system 1)

This object provides the full name and version identification for the system 
hardware and software. This object displays the following string:

[

Company Name

] T1 CSU; model 

xxxx-xx-xxx

; S/W Release: 

yy.yy.yy

; H/W CCA: 

zzzz-zzz

; Serial number

ssssssss.

Where:

xxxx-xx-xxx

 represents the full model number of the unit.

yy.yy.yy

 represents the software revision number of the unit.

zzzz-zzz

 represents the hardware revision number of the unit.

ssssssss

 represents the serial number of the unit.

System Group – “sysObjectID” Object (system 2)

This object provides the authoritative identification of the network management 
subsystem contained in the unit. This object displays the following object identifier:

System group – “sysContact” Object (system 4)

This object provides a textual identification of the contact person for this managed 
node.

System Group – “sysName” Object (system 5)

This object provides an administratively assigned name for this managed node.

System Group – “sysLocation” Object (system 6)

This object provides the physical location of this node.

3150

[

Company OID

].1.14.2.1.1

3151

[

Company OID

].1.14.2.1.2

Содержание ACCULINK 3150











































































































































































































































Отзывы:

Нет отзывов