Paradox Magellan MG5050E, Руководство по установке

Страница: 61 / 68

Magellan & Spectra SP • Installation Guide
61
Settings for BabyWare Software
Note : BabyWare has not been verified by UL.
Panel Answer Options
The following two options define how the control panel answers an incoming call from a computer using the BabyWare Software for Windows®.
Answering Machine Override Delay
Section [902]
000 = Disabled, 000 to 255 seconds, Default = 030
When using the BabyWare software to communicate with an installation site that uses an answering machine or service, the answering machine override must be
programmed. Using the BabyWare software you will call the control panel, hang up, then call back. If the installation site is called back within the programmed delay
period, the control panel will override the answering machine or service by picking-up the line after the first ring on the second call. You must wait at least 10
seconds before attempting the second call, otherwise, the control panel will think it is the same call. For details on how to use the BabyWare software, refer to the
BabyWare Help Manual.
This section applies to the Plug-in Voice Dialer when using a VDMP3.
Example: A security installation is using an answering machine set to answer after three rings. If section [902] has been programmed with 040 (40 seconds) and the
second call is made within 40 seconds, the control panel will pick up the line on the first ring. If it takes more than 40 seconds, the control panel will not answer on
the first ring and the answering machine will answer after three rings.
Number of Rings
Section [901]
000 = disabled, 001 to 015 rings, Default = 8 rings
This value represents the number of rings the control panel will wait before picking-up the line. If the line is not answered after the number of programmed rings,
the control panel will answer the call.
This section applies to the Plug-in Voice Dialer when using a VDMP3.
Panel Identifier
Section [910]
0000 to FFFF
This 4-digit code identifies the control panel to the BabyWare software before initiating communication. The control panel will verify that the Panel Identifier in the
BabyWare software is the same. If the codes do not match, the control panel will not establish communication. Therefore, be sure to program the same panel
identifier into both the control panel and the BabyWare software.
PC Password
Section [911]
0000 to FFFF
This 4-digit password identifies the PC to the panel before establishing communication. Program the same PC Password into both the control panel and the
BabyWare software. If the passwords do not match, the BabyWare software will not establish communication.
PC Telephone Number
Section [915]
Up to 32 digits
The control panel will dial this number when trying to initiate communication with a computer using the BabyWare software. You can enter any digit from 0 to 9 and
any special keys or functions up to a maximum of 32 digits.
Call BabyWare Software
[
ENTER
] + [
INSTALLER CODE
] + [
BYP
]
The control panel will dial the PC Telephone Number programmed in section
[915]
in order to communicate with the BabyWare software. The control panel and
the BabyWare software will verify that the Panel Identifier and the PC Password match before establishing communication.
Answer BabyWare Software
[
ENTER
] + [
INSTALLER CODE
] + [
SLEEP
]
In order to perform on-site upload/download connect your computer directly to the control panel using an ADP-1 line adapter. In the BabyWare software set Dialing
Method to Blind Dial. Program the panel telephone number in BabyWare software and follow the instructions on the ADP-1 adapter. When the computer has dialed,
press
[
ENTER
]
followed by the Installer/Maintenance Code, then press the
[
SLEEP
]
key to manually answer the BabyWare software from the control panel.