18
EVOHD+ Installation Guide
Programming Methods
BabyWare Uploading/Downloading Software*
We recommend programming the control panel with BabyWare. Refer to
on page 68 for details.
* UL Note:
Not verified by UL.
Module Broadcast
Keypads and other modules can also be programmed easily by using Module Broadcast. Once a module is programmed, its sections can be sent to other similar
modules through the Digiplex bus.
Programming Through a Keypad
Use the
“EVOHD+ Programming Guide”
to record how the sections were programmed. To enter programming mode, use a K641+, K656+ or K641R keypad, refer to
the table below. For the TM70/TM50 press and hold the menu Icon.
For LCD Keypads:
The control panel will save the data and go to the next section or press the
[
ENTER
]
key to save the data and go to the next section. Press the
[
CLEAR
]
key go to the preceding step or
to erase the current data entry.
Table 3:
1.
Press and hold the
[0]
key.
2.
Key in the
[
INSTALLER
CODE
]
(default =
000000
).
3.
Key in the 4-digit
[
SECTION
].
4.
Key in required
[
DATA
].
Refer to the “EVOHD+ Programming Guide” or to
the corresponding sections in this manual.
Содержание EVOHD+
Страница 1: ...EVOHD Installation Guide High Security Access System...
Страница 86: ......
