Paradise Datacom 4 RU Chassis, Руководство по эксплуатации

Страница: 36 / 130

36 201627 REV X 4 RU SSPA Chassis Operations Manual
2.2.4 Fault Monitoring Setup Sub-Menu
This menu, shown in
Figure 2-12
, allows the user to select how the SSPA will deal
with fault conditions.
2.2.4.1 BUC Fault
Allows the user to select the Action and the Fault Logic for fault conditions associated
with the BUC. User can select the following Actions: Fault + Mute; Fault; Alert; Ignore.
User can select the following Fault Logic parameters: Fault on High; Fault on Low.
2.2.4.2 Auxiliary Faults
Allows the user to select the Action and the Fault Logic for fault conditions associated
with the Auxiliary connections. User can select the following Actions: Fault; Alert; Fault
+ Mute; Alert + Mute; Ignore. User can select the following Fault Logic parameters:
Fault on High; Fault on Low. See
Section 2.1.2.10a
for a description of how to mute
the amplifier using the Alert + Mute option.
2.2.4.3 RF Switch Faults
Determines whether a switch fault should cause a major alarm and attempt to switch,
or simply show an alert on the front panel, the latter case considered a minor alarm.
Choices are: Sys. Fault, which is the Major Alarm mode and produces a summary
alarm; and Alert, which is the Minor Alarm mode and does not produce a summary
alarm.
Figure 2-12: Fault Monitoring Setup Sub-Menu
2.Com Setup 1.Sys Info 3.Operation 4.Flt. Setup 5.Options
1.BUC Fault
Main Menu
6.Redundancy
2. Aux. Faults 3. RFSw Faults 4.Fault Latch
1.Enable 2.Disable
5.Low RF / ALC
1.Fault 4.Ignore 3.Switch Mute 2.Alert
1.Fault (LowRF) 4.Ignore 3.ALC On 2.Alert
1.Action 2.Fault Logic
1.Fault 4.Ignore 3.Fault+Mute 2.Alert
1.Fault on High 2.Fault on Low
1.Action 2.Fault Logic
1.Fault 5.Ignore 3.Fault+Mute 2.Alert
1.Fault on High 2.Fault on Low
5.Set Level
1.RF Level
MENU ITEM
NOT ACTIVE
UNDER N+1 OPERATION
4.Alert+Mute