Paradise Datacom 4 RU Chassis, Руководство по эксплуатации

Страница: 116 / 130

116 201627 REV X 4 RU SSPA Chassis Operations Manual
2.4 After optional reboot, open the Command Prompt console window and enter:
C:\>IPCONFIG
This will display the IP settings:
0 Ethernet Adapter:
IP Address:
192.168.0.3
Subnet Mask: 255.255.255.0
Default Gateway:
2.5 You can now try to Ping your PC:
In Command Prompt window enter the following:
C:\>ping 192.168.0.3
This will display:
Pinging 192.168.0.3 with 32 bytes of data:
Reply from 192.168.0.3: bytes=32 time<10ms TTL=128
Reply from 192.168.0.3: bytes=32 time<10ms TTL=128
Reply from 192.168.0.3: bytes=32 time<10ms TTL=128
Reply from 192.168.0.3: bytes=32 time<10ms TTL=128
Ping statistics for 192.168.0.3:
Packets: Sent=4, Received=4, Lost=0 (0%loss),
Approximate round trip times I milli-seconds:
Minimum=0ms, Maximum=0ms, Average=0ms
Your network LAN card is now set up.
3. On the RM SSPA unit front panel, select sequentially:
Main Menu
→ 2.Com.Setup → 5.IPSetup → 2.LocalIP and then select address
192.168.0.0 by using the front panel navigation keys. Then press Enter. Follow the
same menu route to select the Subnet, Gateway, IPPort and IPLock items, and set
those parameters to:
Subnet:255.255.255.0;
Gateway:0.0.0.0;
IPLock:255.255.255.255;
IPPort:1038.
Verify the selected parameters by choosing item 1.IPInfo.