4 RU SSPA Chassis Operations Manual
201627 REV X
117
4. On the RM SSPA unit front panel select sequentially:
Main Menu
→
2.Com.Setup
→
4.Interface
→
3.IPNet, then press Enter. The RM SSPA
is now set up to work with Ethernet Interface. You may now ping the SSPA unit from
host PC:
C:\>ping 192.168.0.0
This will display:
Pinging 192.168.0.0 with 32 bytes of data:
Reply from 192.168.0.0: bytes=32 time<10ms TTL=128
Reply from 192.168.0.0: bytes=32 time<10ms TTL=128
Reply from 192.168.0.0: bytes=32 time<10ms TTL=128
Reply from 192.168.0.0: bytes=32 time<10ms TTL=128
Ping statistics for 192.168.0.3:
Packets: Sent=4, Received=4, Lost=0 (0%loss),
Approximate round trip times I milli-seconds:
Minimum=0ms,
Maximum=0ms,
Average=0ms
5. Run the Teledyne Paradise Datacom Universal M&C package on the host PC to
check all M&C functions. Refer to
Appendix C
for details. When prompted, select an
Internet connection to the unit using IP Address 192.168.0.0, local port address to
1039 and remote port address to 1038. The SSPA now connected to your host work-
station for remote M&C.
Содержание 4 RU Chassis
