Paoli DP05-34B, Руководство по эксплуатации

Страница: 51 / 68

5.
Ensure that the reaction arm (Fig. 21/1) is braced against a
bracing surface (Fig. 21/3) on its side facing the nutrunner’s
desired direction of rotation. Ensure that there is full contact.
6.
Do not retighten. Do not repeat correctly completed bolting
processes.
7.
Standard direction of rotation: Right-hand
thread
Direction of
rotation setting
Direction of rotation
Right-hand side
is pressed.
Clockwise (CW)
Tightening in clockwise direction
Middle position No rotation possible.
Transport position
Left-hand side is
pressed.
Counterclockwise (CCW)
Loosening in counterclockwise
direction
To tighten in clockwise direction (CW), push the direction of
rotation setting (Fig. 22/1) to the right.
To loosen in counterclockwise direction (CCW), push the
direction of rotation setting (Fig. 22/2) to the left.
ð
An acoustic signal sounds if torque levels are blocked.
Fig. 21: Starting rotation angle
1 Reaction arm
2 Starting rotation angle
3 Bracing
Direction of rotation
Fig. 22: Direction of rotation
1 Tightening in clockwise direction
2 Loosening in counterclockwise
direction
3 Trigger
Tightening
51