1/2” pneumatic reversible hammer
Article: 1562
Code: 615321
Pneumatic reversible hammer 1562 apply
to PREN 792 -6.
Vibration level per ISO 8662-7
Noise level according to ISO 3746:1995 (E)
Maximum air pressure: 6.2 BAR (90 PSI)
OPERATING INSTRUCTION
1. Warning
1.1 Air pressure :
The air pressure must be restricted at or less than the maximum pressure of 90
psi (6.2 bar), do not exceed it.
1.2 Air line :
Use an air hose between the compressor and the tool. The corresponding hose
internal diameter is recommended in the attached table in the data sheet.
Compressed air is cooled and its water content separated as soon as the air
leaves the compressor. However some of the water is condensed in the piping,
and can enter the tool mechanism and cause damage. An air filter and on oiler
should be installed between the compressor and the tool. Use a recommended
compressor in the date sheet or larger for each tool.
WARNING :
* always read the instruction before using power tools
* always wear safety googles
* wear hearing protection
* Avoid prologned exposure to vibration
Square
Drive
S.T.D
Bolt Size
Free
Speed
Max.
Torque
Overall
Length
Air
Inlet
Air
Hose
Avg.
AirConsumption
Net
Weight
Sound
Pressure
Vibration
inch
inch mm
R.P.M
ft-lb N.M
inch
mm
PT
I.D
cfm
l/min
lbs
kgs
DB
M/S2
1/2
3/4
M18 6500
600
813
7 29/32 200
1/4
3/8
4.4
124
6.16 2.80 83
0.8
