Paoli DP05-34B Скачать руководство пользователя страница 38

Страница: 38 / 68

Safety shoes protect the feet from crushing, falling parts and from

slipping on slippery ground.

Hearing protection is used to protect against hearing damage

cause by noise.

Safety goggles are used to protect the eyes from airborne parts

and liquid jets.

Protective work clothing is tight fitting work clothing that resists

tearing to some degree, with tight sleeves and without any pro-

truding parts.

The protective cap (hairnet) is used to protect the hair from being

pulled in by rotating and moving parts, such as bolts.

The wearing of a protective cap is mandatory if your hair is longer

than the circumference of the moving shaft.

Industrial safety helmets are used to protect the head from falling

objects, suspended and swinging objects and from bumping into

stationary objects.

An industrial safety helmet must be worn for overhead work

involving the nutrunner.

Safety shoes

Hearing protection

Safety goggles

Protective work clothing

Protective cap

Industrial safety helmet

Before you begin

Safety gloves are used to protect the hands from friction, abra-

sions, punctures or deeper injuries and from contact with hot sur-

faces.

3.9 Personal protective equipment

Safety gloves

Содержание DP05-34B





































































Результаты поиска

Содержание DP05-34B

Отзывы:

Похожие инструкции для DP05-34B

Бренды по названию

Популярные бренды

Paoli DP05-34B, Руководство по эксплуатации

Результаты поиска

Содержание DP05-34B

Отзывы:

Похожие инструкции для DP05-34B

Бренды по названию

Популярные бренды