Paoli DP05-34B Скачать руководство пользователя страница 21

Страница: 21 / 68

Before you begin

The following symbols and information notices are located on the

nutrunner:

The equipment marked in this way is supplied with electrical

energy.

Do not open the nutrunner.

Keep your hands away from areas bearing this warning.

There is a danger of body parts being crushed, pulled in or other-

wise injured.

It is necessary to pay greater attention when performing work at

the marked locations.

Hot surfaces, such as the housing of the drive motor, cannot

always be identified as such. Do not touch surfaces marked in this

way without protective gloves.

Read the operating instructions prior to using the nutrunner.

This symbol indicates protection class II. Equipment of protection

class II has reinforced insulation between active and touchable

parts.

Do not dispose of waste electronic and electrical equipment

marked with this symbol in household waste.

The test badges state the dates of the respective tests.

Voltage

Danger of crushing

Hot surface

Follow the manual

Protection class II

Separate collection

Test badges

Содержание DP05-34B





































































Результаты поиска

Содержание DP05-34B

Отзывы:

Похожие инструкции для DP05-34B

Бренды по названию

Популярные бренды

Paoli DP05-34B, Руководство по эксплуатации

Результаты поиска

Содержание DP05-34B

Отзывы:

Похожие инструкции для DP05-34B

Бренды по названию

Популярные бренды