Paoli DP05-34B, Руководство по эксплуатации

Страница: 42 / 68

4.
Slide on the circlip (Fig. 13/1) with the aid of the circlip pliers
(Fig. 14) and clamp it.
ð
The reaction arm is secured.
5.
Attach the impact wrench socket (nut) to the square drive on
the nutrunner and secure it.
To do so, push the impact wrench socket (Fig. 15/1) fully onto
the square drive (Fig. 15/3). The bores (Fig. 15/2, 3 and 5)
for securing must be on top of each other.
Fully insert the spring clip (Fig. 15/4) in all bores (Fig. 15/2, 3
and 5) until the ring is fully seated.
ð
The impact wrench socket is secured.
6.
Attach further accessories if such accessories have been
determined for the bolting process.
Fig. 14: Circlip pliers
Fig. 15: Securing the impact wrench
socket
1 Impact wrench socket
2 Bore
3 Square drive with bore
4 Spring clip for impact wrench
socket
5 Bore
Preparing the nutrunner
42