Panduit Synapsense, Руководство по установке

Страница: 25 / 33

INTELLIGENT GATEWAY INSTALLATION MANUAL
24
Figure 1 – Accessing Web Console Data Center Floor plan
The screen refreshes and displays the wireless sensor network (including Gateways) for
the data center.
Place your cursor over a Gateway device on the display. The name and status of the
device displays next the Gateway graphic representation (see Figure 2).
Figure 2 – Web Console: Gateway Master and Slave Syncs
N
OTE
: In a data center with multiple Gateway devices, one Gateway device is
desi
gnated the “master”, and the remaining Gateway devices are designated as
“slaves”.
If the rollover display states “Master, sync” or “Slave, sync”, the Gateway is
communicating with the software.
If the rollover display states “Master, not sync” or “Slave, not sync”, the Gateway is not
communicating with the software. Refer to
Troubleshooting for tips on resolving
connectivity and communication issues.
N
OTE
:
This process can take up to 30 minutes to synchronize with the Web Console
display.
When issues are resolved, perform the previous steps in this procedure to confirm the
Gateways are communicating properly.