Panduit Synapsense, Руководство по установке

Страница: 24 / 33

INTELLIGENT GATEWAY INSTALLATION MANUAL
23
Installation Inspection
Inspections ensure installations are correct and Gateway devices communicate with
SynapSense Web Console
™.
Inspect Operations and Appearance
1. Verify all installed Gateway devices are connected properly (Power Adapter, Ethernet Cable, etc.)
and receiving power.
2. Verify Gateway devices are installed in areas in which there is a clear line of sight for wireless sensors
radio transmissions.
3. Verify Ethernet cables and Power Adapter wires are secured where needed.
Inspect Software Communication
Perform the following steps to confirm Gateway operations and communications (Figure
1 corresponds with steps 1 through 4). Refer to the Web Console User Guide for
detailed information.
1. Access the SynapSoft Web Console software and select the appropriate data center from the Sites list.
2. Click the Floor plan tab in the Data Center section.
3. Open the slide-out menu to the right of the screen then select Wireless Sensor Network.
4. Select the network where the gateway was installed (Network: and Hop Level: dropdown lists, and
associated checkboxes).