AT-OMNI-121 / AT-OMNI-122
48
Device Operation
10.
Login to the decoder, click the
IP Input
menu, then
locate an Input that does
not
contain a defined Multicast
address field. In this example,
Input 5
will be used.
Note that if a multicast address was used in Step 8,
then that multicast address must be entered in the
Multicast address
field under
Input 5
.
11.
Click the
Enable
toggle switch to enable the Input.
When an Input is enabled, the toggle switch will be
orange.
12.
Enter the UDP port, from Step 8, in the
Port
field.
13.
Click the
SAVE
button.
5
6
7
8
8
9
5.
Click the
Session
menu.
6.
Under the desired Session, locate the
AUX
section, click the
Source
drop-down list, and select
Commands
.
7.
Click the
Enable
toggle switch to display the additional fields.
8. Enter the destination IP address and UDP port, of the decoder, in the
Destination IP address
and
Destination
UDP port
fields, respectively. A multicast address can also be entered in the
Destination IP address
field.
9.
Click the
SAVE
button.
10
11
12
13
