AT-OMNI-121 / AT-OMNI-122
42
Device Operation
11
12
13
14
15
16
17
11.
Login to the decoder and click the
IP Input
menu.
12.
Locate an Input that does
not
contain a defined Multicast address field. In this example,
Input 5
will be used.
Note that if a multicast address was used in Step 9, then that multicast address must be entered in the
Multicast
address
field under
Input 5
.
13.
Click the
Enable
toggle switch to enable the Input. When an Input is enabled, the toggle switch will be orange.
14.
Enter the UDP port, from Step 9, in the
Port
field.
15.
Click the
SAVE
button.
16. On the decoder, click the
Serial
menu, and under
Serial
port configuration
, click the
Mode
drop-down list and
select
serial
.
17.
Click the
SAVE
button.
