27
USER MANUAL
WIRING DESCRIPTION
Х5 socket (main socket):
• Wire «1» (White) (Tachometer input)
— analog input of the tachometer signal, it connects to
the tachometer wire or to the signal wire of a nozzle, which provide stable pulses of any polarity cor-
responding to the RPM.
• Wire «2» (Red-black) (CH5)
— Factory setting is ‘Beeper’. A negative output of additional chan-
nel with maximum load current 200mA. This output is multipurpose, it can operate in accordance with
selected logic.
• Wire «3» (Orange-white) (CAN1-High)
— It connects to appropriate CAN-High wire of the car.
• Wire «4» (Yellow-white) (CAN2-High)
— It connects to appropriate CAN2-High wire of the car.
• Wire «5» (Gray) (СН1/INP1)
— Factory setting is ‘Door trigger. This wire connects to a wire that
becomes grounded when the door opens. This wire is multipurpose, it can operate as input and as
output in accordance with selected logic.
• Wire «6» (Green) (СН4/INP4)
— Factory setting is ‘Control turn indicators’. This wire connects to
the hazard flashers button. A negative output of additional channel with maximum load current 200mA.
This wire is multipurpose, it can operate as input and as output in accordance with selected logic.
• Wire «7» (White-Blue) (INP5)
— Factory setting is ‘Brake pedal’. This wire connects to the brake pedal
trigger where 12V voltage appears when the pedal is pressed (stop lights wire). Brake pedal signal is one of
the system’s security zones. This input is multipurpose, it can operate in accordance with selected logic.
• Wire «8» (Black) (Ground)
— It should be connected to the car body in a grounding spot. This
wire should be connected FIRST during installation.
• Wire «9» (Blue) (CH2/INP6)
— Factory setting is free output. A negative output of additional
channel with maximum load current 200mA. This wire is multipurpose, it can operate as input and as
output in accordance with selected logic.
• Wire «10» (Brown-White) (INP3)
— Factory setting is ‘Front hood and trunk trigger’. This wire
connects to appropriate wire that becomes grounded when the front hood opens. This input is multi-
purpose, it can operate in accordance with selected logic.
RMD-5M Relay module
** Total current of relays R3+R4+R5
should not exceed 40A
*
For remote start implementation
with the "Start/Stop button" logic
3 6
5
2
1 4
+ 12V
Starter
CH10
Bypass
CH9
NO blocking
/ NC
CH6
ACC
/ Brake pedal*
CH7
Ignition
/ Button*
CH8
R4
R5
R3
R2
R1
R1
R2
R3
R4
R5
20A
**
20A
**
20A
**
20A
20A
Relay module
Brown
Yellow
Orange
Green/Red
Blue/Red
40А
Blue
Blue/Black
Green
Green/Black
Red
Brown
(–)
Yellow
(–)
Orange
(–)
Green
(–)
Blue
(–)
Red
(+)
