15
14
USER MANUAL
PANDORA DXL 1940L CAR SERVICE-SECURITY SYSTEM
‘297*’ - end call DTMF command.
Contact can be added as a speed dial to any of the free button.
To have simple access to engine start function a phone other than the main owner’s phone, create
contact in the following format:
+XXXXXXXXXXX,1234,123*,297*
where ‘1234’ – guest PIN-code.
Enable/Disable maintenance mode
1. Call the system number. Wait for answer.
2. To enable maintenance mode, dial ‘Enable maintenance mode’ DTMF command 551* (the igni-
tion should be switched on, radio tag should be in rage if immobilizer/AntiHijack mode is active)
3. Enter the ‘Secret PIN-code’ that is located on the owner’s plastic card.
4. To disable maintenance mode, dial
552*
DRMF command.
Voice help
The system has voice help menu. During voice call to the system, dial
9*
and listen to the informa-
tion about system control commands. To end session, hang up the phone.
Repeat the last message
To repeat any message, press
*
during a voice call to the system
Arming/disarming
Pandora system has function of promptly disabling automatic engine start.
1. Call the system number. Wait for answer.
2. Dial
1*
to arm, and
0*
to disarm
3. For silent arming dial
10*
or
00*
for silent disarming
4. The system will confirm arming/disarming.
Enabling/disabling automatic engine start
1. Call the system number. Wait for answer.
2.
987*
to disable all automatic engine starts or
789*
to enable all automatic engine starts
3. The system will confirm the command execution
To end session, hung up the phone
Automatics starts can be enabled again by dialing
789*
(all previous settings will remain intact)
Blocking/unblocking the engine
You can block car’s engine using any phone. The engine will remain blocked until phone command
‘Disable engine blocking’ will be sent. This blocking cannot be disabled using a tag.
1. Call the system number. Wait for answer.
2. Dial
666*
to enable engine blocking or
999*
to disable engine blocking (after dialing
999*
, you
will need to enter the ‘Secret PIN-code’ that is located on the owner’s plastic card).
Request current coordinates
1. Call the system number. Wait for answer.
2. Dial
500
*.
3. The system will confirm: ‘Current coordinate sent via text message’ and will send text message
with coordinates and a web link to a map to your phone.
To end session, hang up the phone.
An additional GPS/GLONASS receiver NAV-035 BT is required to determine the coordinates (see p. 39)
Request GSM account balance
1. Call the system number. Wait for answer.
2. Dial
100*
.
3. The system will confirm: ‘Balance information sent via text message’ and will send text message
with account balance information to your phone.
To end session, hang up the phone.
WARNING!
ENABLE REMOTE START ONLY IF YOUR LOCAL LEGISLATION ALLOWS DRIVER-
LESS CARS TO HAVE WORKING ENGINE.
WARNING! DISABLING OF THE ENGINE BLOCKING THAT WAS ENABLED VIA A
PHONE 666* IS ALLOWED ONLY BY DIALING 999* AND ENTERING THE ‘SECRET
PIN-CODE’
