background image

45

44

USER MANUAL

PANDORA DXL 1940L CAR SERVICE-SECURITY SYSTEM

Warranty obligations

Manufacturer guarantees correct operation of the service-security system if exploitation, installa-

tion, storage and transportation conditions described in this manual were met.

The system should only be used according to installation scheme and user manuals. The system 

is meant to be installed by the professional car electronics installers. We recognize that outside Russia 
the system can be installed by amateurs – those installations are still a subject of limited warranty. The 
installer should fill in installation certificate that is included in this manual.

Parts malfunctioning during warranty period on the fault of the manufacturer should be repaired 

or replaced by the installation center of the manufacturer or by certified service center. List of certified 
service centers outside Russia can be found on pandorainfo.com

The user loses the right for warranty services in the following cases:
•   when warranty period expires;
•   if exploitation, installation, storage or transportation conditions were not met;
•   if there is mechanical damage of the external parts of the system after it is sold. This includes: fire 

damage, consequential damage in case of car accident, aggressive liquids and water seeping damage, 
damage caused by improper use;

•   if the damage was caused with incorrect settings and parameter adjustment;
•   if system devices are replaced with any devices that are not recommended by the manufacturer;
•   if manufacturer sealing is broken;
•   if there is no properly filled warranty card and installation certificate.
Warranty period is 3 years since the moment of purchase, but no more than 3,5 (three and a half ) 

years since the moment of production.

This warranty does not include batteries of the remotes, as they have their own service life time. 

Maintenances and repairs of the system with expired warranty period are carried out at the expense of 
the user on separate contracts between the user and the installer/service center.

Transportation rules
Products should be transported in the original packaging by any means of transport as long as 

they are protected from mechanical damage and precipitation. Packaged products should be stored 
on racks in piles of 6 or less boxes, in enclosed, dry, heated rooms (no less than 1m from heating) which 
exclude possible interaction with moisture, oil products and damaging environmental factors.

WE RECOMMEND YOU TO FILLING OUT INSTALLATION CERTIFICATE AND WARRANTY 
CARD BY INSTALLER. THESE DOCUMENTS MAY BE REQUIRED FOR CONTACTING CUS-
TOMER SUPPORT.

INSTALLATION CERTIFCATE

I, the undersigned_________________________________________________________
         

 

 

 

Position, name. 

______________________________________________________________________________
professional installer, certify that installation of the service-security system, specified below, was carried 
out by me in accordance with manuals and schemes provided by the manufacturer.

Car specifications:

Car model____________________________________________ Type _____________________

Id number (VIN)_________________________________________________________________

Registration number_____________________________________________________________

Security system specification:

Model Pandora DXL 1940L

Serial number______________________________

Service center name, full address and installer’s stamp
______________________________________________________________________________
______________________________________________________________________________

Signature_____________________/___________________________________/
                                                                                                     Signator
Work accepted__________________/___________________________________/
                                                                                                      Signator
Date «____»___________________20___year.

Содержание DXL 1940L


























Отзывы: