![background image](http://html1.mh-extra.com/html/panasonic/wvnf302-network-camera/wvnf302-network-camera_setup-instructions_4186630041.webp)
41
Configure the settings relating to the priority stream [System]
Click the [System] tab on the "User mng." page. (
☞
pages 4 and 5: How to display/operate the setup menu)
Configuring the following settings for the priority stream (to transmit images to multiple users without changing image
quality).
■
Priority stream
[Activation]
Select "On" or "Off" to determine whether or not to use
the priority stream.
On:
Use the priority stream.
Off:
Do not use the priority stream.
Default:
Off
Note:
When "On" is selected for "Activation" of "Priority
stream", number of users who can access the cam-
era will be limited.
[Destination IP address (IPv4)]
Enter the destination IPv4 address.
[Destination IP address (IPv6)]
Enter the destination IPv6 address.
[Stream type]
Select "MPEG-4" or "JPEG".
MPEG-4:
MPEG-4 images will be transmitted.
JPEG:
JPEG images will be transmitted.
Default:
JPEG
[Refresh interval*]
Select the refresh interval from the following.
This setting is validated only when "JPEG" is selected
for "Stream type".
Note:
The refresh interval may be longer than the set
value when any value with an asterisk (*) on the
right is selected.
0.1 fps/0.2 fps/0.33 fps/0.5 fps/1 fps/2 fps/3 fps/5 fps/
6 fps*/10 fps*/15 fps*/30 fps*
Default:
1 ftp
[Image capture size]
Select the image capture size from the following.
QVGA/VGA/1 280 x 960
Default:
VGA