26
Set mask areas
When "Off" is selected for "Back light compensation (BLC)", it is possible to compensate for backlight by masking
brighter areas.
Step 1
Display the setup menu of "Image adjust". (
☞
page 24)
Step 2
Click the [Start] button of "Mask area".
→
Borders will appear and the image displayed on the
[Image/Privacy] tab will be divided into 48 (6x8).
Step 3
Click the divided areas to be masked.
→
The clicked areas will be masked and will become
white.
To cancel masking, click the area again.
Step 4
Click the [End] button after completing masking areas.
→
The borders on the image displayed on the [Image/
Privacy] tab will disappear.
Note:
When the [Reset] button is clicked, masking for all
the masked areas will be canceled.
