25
Notes:
• Under the following conditions, color may not be
faithfully processed. In these cases, select "AWC".
• When shooting a subject whose major part is a
thick color
• When shooting blue sky or sun at sunset
• When shooting a subject whose luminance is too
low
[Red gain]
Adjust the red color of images.
When the cursor is moved in the "+" direction, the red
color will become thicker. When the cursor is moved in
the "–" direction, the red color will be thinner. Click the
[Reset] button to reset the color to the default.
[Blue gain]
Adjust the blue color of images.
When the cursor is moved in the "+" direction, the blue
color will become thicker. When the cursor is moved in
the "–" direction, the blue color will be thinner. Click the
[Reset] button to reset the color to the default.
[Chroma gain level]
Adjust the chroma level (color density).
When the cursor is moved in the "+" direction, the colors
will become thicker. When the cursor is moved in the "–"
direction, the colors will be thinner.
Click the [Reset] button to reset the color to the default.
[Aperture level]
Adjust the aperture level (outline compensation).
Images will be sharper when the cursor is moved in the
"+" direction, and will be softer when the cursor is
moved in the "–" direction.
Click the [Reset] button to reset the level to the default.
[Pedestal level]
Adjust the black level of images by moving the cursor.
When the cursor is moved to the "+" direction, images
will become brighter. When the cursor is moved to the
"–" direction, images will be darker.
Click the [Reset] button to reset the level to the default.
[Close] button
Click this button to close the "Image adjust" setup menu.
Off / Max.2/30s / Max.4/30s / Max.6/30s / Max.10/30s /
Max.16/30s
Default:
Off
Important:
When "On" is selected for "Auto slow shutter", frame
rate may become lower. Noise or white dots (blem-
ishes) may sometimes appear.
Note:
When "Max.16/30s" is selected, for example, sensi-
tivity will automatically be increased up to x16.
[Simple Black & white mode]
Select switching between the color mode and the black
& white mode.
Off:
The color mode is selected.
Auto:
The camera automatically switches between the
color mode and the black & white mode in accor-
dance with picture brightness (luminance). The black
& white mode is selected when lighting is low, while
the color mode is selected for bright lighting.
Default:
Off
Notes:
• Indication of brightness (illuminance) as a trigger to
switch from the color mode to the black & white
mode: Approx. 4 lx (when "Auto" is selected)
• Time to complete the switch from the color mode to
the white & black mode: Approx. 5 seconds
[White balance]
Select a method of white balance adjustment from the
following.
White color can be adjusted by "Red Gain" and "Blue
Gain".
ATW1:
Auto tracing white balance mode
The camera will constantly check the color tempera-
ture of the light source and adjust the white balance
automatically.
Operating color temperature range is approx.
2 700 K – 6 000 K.
ATW2:
Auto tracing white balance under a sodium
lamp. The camera will adjust the white balance auto-
matically under a sodium lamp.
Operating color temperature range is approx.
2 000 K – 6 000 K.
AWC:
Auto white balance control mode
Suitable for shooting where the light source is fixed
and the light intensity is constant. Operating color
temperature range is approx. 2 000 K – 10 000 K.
Default:
ATW1
