10
■
SD memory card
[SD memory card]
Select "Use" or "Not use" to determine whether or not to
use the SD memory card.
Default:
Not use
Important:
• Before removing the SD memory card from the cam-
era, it is necessary to select "Not use" first.
• After inserting the SD memory card, it is necessary
to select "Use" to use the SD memory card.
• When playing or downloading images saved on the
SD memory card, it is necessary to select "On" for
"Save logs" on the [Log] tab (
☞
page 16) in
advance.
• When the configured image refresh interval is high,
timing or interval of notification or recording may
become inexact and notification or recording may
not carried out as configured when multiple users
are receiving images. If this happened, set the
image refresh interval lower.
• There are limited times to overwrite on an SD mem-
ory card. When frequently overwritten, it may be at
the end of product life. It is recommended to replace
the SD memory card.
[Remaining capacity notification]
When the "Mail notification" function or the "Panasonic
alarm protocol" function is used to provide notification of
the remaining capacity of the SD memory card, select a
level to be notified at from the following.
50 %/20 %/10 %/5 %/2 %
Default:
50 %
Note:
Notification will be provided each time the remaining
capacity of the SD memory card reached the values
above.
For example, notification will be provided each time
the remaining capacity reaches 50%, 20%, 10%, 5%
and 2% when "50%" is selected. Notification may not
always be made at the very moment when the
remaining capacity of the SD memory card has
reached each value.
[Save trigger]
Select a trigger to save images on the SD memory card
from the following.
FTP error:
Saves images when images have failed to
transmit to the FTP server by the FTP periodic
image transmission function.
Alarm input:
Saves images at an alarm occurrence.
Manual:
Saves images manually. (
☞
Operating instruc-
tions)
Default:
FTP error
Configure the settings relating to the SD memory card [SD memory card]
Click the [SD memory card] tab on the "Basic" page. (
☞
pages 4 and 5: How to display/operate the setup menu)
The settings relating to the SD memory card can be configured on this page.
Important:
• It is impossible to display images and to receive/
transmit audio between the camera and the PC
when the viewer software "Network Camera View3"
is not installed on the PC.
• The number of the viewer software installations can
be checked on the [Upgrade] tab of the
"Maintenance" page.
