[User name]
Enter the user name (login name) to access the HTTP server.
•
Available number of characters:
0 - 63 characters
•
Unavailable characters:
" & : ; \
•
Default:
None (blank)
[Password]
Enter the password to access the HTTP server.
•
Available number of characters:
0 - 63 characters
•
Unavailable characters:
" &
•
Default:
None (blank)
[Notification data]
Enter the notification data to add after the destination HTTP server addresses set in [Address 1] - [Address
5].
•
Available characters:
Alphanumeric characters
•
Default:
/cgi-bin/comalarm.cgi?CMD=01
Note
•
When the HTTP alarm function is enabled, leakage of the HTTP server authentication information (user
name and password) may occur in the network at the time of HTTP alarm notification.
•
For “Address 1” to “Address 5”, a total of 256 characters can be entered for the address (including
“http://”) and “Notification data”.
•
Make sure to enter a slash (/) as the first character for “Notification data”.
•
If the HTTP alarm notification fails, information about the failure will be added to the system log.
•
Even if the [Set] button is clicked after deleting the contents of “Notification data”, “/cgi-bin/
comalarm.cgi?CMD=01” will be set.
•
HTTPS cannot be used.
•
When a hardware error notification is set, a notification is provided when there is damage to the IR
LEDs or built-in camera fan. If the IR LEDs or built-in camera fan are damaged images may not be
able to be viewed. Therefore, we recommend setting hardware error notifications.
•
When a Wi-Fi USB adaptor insertion-extraction notification is set, a notification is provided when access
from an unintended Wi-Fi USB adaptor is detected. Therefore, we recommend setting Wi-Fi USB
adaptor insertion-extraction error notifications.
<Example>
When http://192.168.0.100 is set for the address and /cgi-bin/comalarm.cgi?CMD=01 is set for “Notification
data”, an HTTP alarm notification such as http://192.168.0.100/cgi-bin/comalarm.cgi?CMD=01 will be
executed.
Operating Instructions
51
2 Settings
