Panasonic WV-X5550LT, Руководство по эксплуатации

Страница: 55 / 100

[Access level]
Select the available functions based on the user access level (camera control, live view, guest user).
•
Default:
–
Camera control: All are checked
–
Live only: All are not checked
–
Guest User: All are not checked
Note
•
If you have set “User authentication” to “Off”, and “Guest User” to “Not use”:
The “Access Level” item cannot be set. And, while all the live operation buttons are displayed, the
[Setup] buttons require authentication.
•
If you have set “User authentication” to “Off”, and “Guest User” to “Use”:
You can set the items for “Guest User”.
•
If you have set “User authentication” to “On”:
You cannot set the items for “Guest User”.
You can set the following functions.
Live view selectable Selecting an image displayed in the live view setting permissions
Snap shot Snap shot operation permissions (
®
page 13)
Brightness
Brightness setting permissions (
®
page 13)
2.7.2 Configure the settings relating to the host authentication
[Host auth.]
Click the [Host auth.] tab on the “User mng.” page. (
®
page 19, page 20)
The restriction settings of PCs (IP address) from accessing the camera can be configured on this page.
[Host auth.]
Select “On” or “Off” to determine whether or not to authenticate the host.
•
Default: Off
IMPORTANT
•
Set “Host auth.” to “On” after registering the IP address of the PC.
Operating Instructions 55
2 Settings