IMPORTANT
•
Use an NTP server when the more accurate time & date setting is required for the system operation.
(
[NTP]
When “NTP >>” is clicked, the [Advanced] tab of the “Network” page will be displayed. (
®
[Time zone]
Select a time zone corresponding to the location where the camera is in use.
•
Default:
(GMT +09:00) Osaka, Sapporo, Tokyo
[Summer time (daylight saving)]
Select “In”, “Out” or “Auto” to determine whether or not to apply daylight saving time. Configure this setting if
the summer time (daylight saving time) is applied in the location where the camera is in use.
•
In:
Applies summer time. An asterisk (*) will be displayed on the left side of the displayed time and date.
•
Out:
Does not apply summer time.
•
Auto:
Applies summer time in accordance with the settings for “Start time & date” and “End time &
date” (month, week, day of the week, time).
•
Default:
Out
[Start time & date] [End time & date]
When “Auto” is selected for “Summer time (daylight saving)”, select the time & date for the start time and the
end time (month, week, day of the week, time).
[Brightness status display]
Select “On” or “Off” to determine whether or not to display the status of brightness on images displayed on the
“Live” page when adjusting brightness.
•
Default:
On
[Viewer software (nwcv4Ssetup.exe)] - [Automatic installation]
Determine whether or not to install the viewer software from this camera.
•
On:
Installs the viewer software from the camera automatically.
•
Off:
The viewer software cannot be installed from the camera.
•
Default:
On
IMPORTANT
•
For PCs that do not have the viewer software “Network Camera View 4S” installed, JPEG images are
displayed. You cannot display images using H.265 (or H.264). In order to display H.265 (or H.264)
images, you must click “Viewer Software” on the “Live” page (
®
page 12) and then install the viewer
software.
•
The number of the viewer software installations can be checked on the [Upgrade] tab of the
“Maintenance” page.
Note
•
When “Off” is selected for “Automatic installation”, the [Viewer Software] button is not displayed on the
live screen.
[Viewer software (nwcv4Ssetup.exe)] - [Drawing method]
Perform image display settings when displaying camera images with the viewer software.
•
GDI:
The drawing method generally used in Windows.
•
Direct2D:
Can reduce choppy drawing of images.
•
Default:
GDI
Operating Instructions
27
2 Settings
