17
Live Mode Panel
The live mode panel contains the buttons to control the selected camera. (When the quad screen is displayed, this
panel is not displayed.) The buttons displayed in the live mode panel differ depending on the model of the selected
camera.
How to display the live mode panel
The live mode panel will be displayed by one of the fol-
lowing operations:
• Clicking one of the "Camera Select" buttons in the
camera selection menu.
• Clicking the "Live Mode" tab in the live mode panel.
About the user authentication dialog window:
When a user who is authenticated as a "Monitor" user
clicks a button in the live mode panel, the user authen-
tication dialog window will be displayed. In this case,
perform the authentication as an "Operator" or as an
administrator.
Note: The authentication dialog window will be dis-
played when a user tries to access a camera which
the user is not allowed to access. In this case, can-
cel the operation or enter a valid user name and
password to be allowed to access and operate the
selected camera.
About camera control:
It is impossible to operate the camera if another user is
currently operating it (it is possible to access the
selected camera only to view live pictures.)
When the selected camera is a WV-NS324 or a
camera connected by the network interface unit
WJ-NT104:
Note: The operable buttons will depend on the fea-
tures of the camera connected by the WJ-NT104.
When the selected camera is a WV-NM100:
When the selected camera is a WV-NP472:
Manual Recording ("Live View & Recording")
Click the [
●
] button to record the currently monitored
camera picture on the hard disk of the network camera
server. If the camera picture is recorded in the JPEG
format, the camera picture will be recorded at 1 fps
(JPEG) until the [
■
] button is clicked. If the camera pic-
ture is recorded in the MPEG-4 format, the camera pic-
ture will be recorded at the transmission rate of the
camera until the [
■
] button is clicked. The "Priority" of
manual recording is "4" and pictures recorded by man-
ual recording will be stored in the protected disk space.
Notes:
When pictures are recorded in the JPEG format,
recording interval may differ as below.
• If a recording whose priority is higher than the man-
ual recording priority (for example, alarm recording
(priority: 3) or a schedule recording whose priority
is set to "1", "2" or "3" and whose recorded pictures
are set to be stored in the protected disk space), is
performed during manual recording, pictures will be
recorded at the recording interval of the recording
whose priority is the highest.
