Panasonic WJHD309A - DIGITAL DISK RECORDER, Инструкции по настройке сети

Страница: 59 / 115

59
Detection mode
There are three detection modes as follows.
Important:
Activating two or more detection modes simultaneously is not possible.
<ANY AREA mode>
An event action will be performed according to the settings when "motion" is detected in any of the set motion detec-
tion areas.
<VECTOR mode>
An event action will be performed according to the settings when an object moves within the set time to the other
detection area in the set order.
The following is an example.
Motion is detected in area B within 10 seconds after being detected in area A.
Motion is detected in area C within 20 seconds after being detected in area B.
Motion is detected in area D within 10 seconds after being detected in area C.
When all of the above have occurred, an event action will be performed.
<DURATION mode>
An event action will be performed according to the settings when an object keeps on moving for the set period in the
detection area. For example, with the following settings; 10 sec. for areas A and B, 20 sec. for area C and 30 sec. for
area D:
A B
C D
Any motion will be detected anywhere in the A, B, C, D areas.
A B
C D
10 s
10 s
20 s
A
10 s
B
10 s
C
20 s
D
30 s