7
Screenshot 1
Start just after the PC is started up.
Important:
Log in to the PC as an administrator.
Step 1
On the taskbar, click "Start", and then click the "Control
Panel".
Performing the network settings
With the following network environment, it is not necessary to perform the network settings. It is possible to perform
the settings or operate this unit using a web browser after completing the connection.
IP Address: 192.168.0.2 - 192.168.0.249, 192.168.0.251 - 192.168.0.254
Subnet Mask: 255.255.255.0
Gateway Address: 192.168.0.1
When the network settings are different from the settings above, perform the network settings of this unit and the
PC.
Performing the network settings of this unit
Use the buttons on the front panel of this unit to conform the network settings to the network environment of the PC.
Refer to the Operating Instructions (book) for further information about the network settings ([SETUP] - [Comm]
Settings for communication with other devices – [NW Setup 2] Network connection settings).
Performing the network settings of a PC
Change the TCP/IP setting of the PC to conform to the settings of this unit.
It is required to set the IP address of the PC to "192.168.0.XX (a number from 2 to 254 except 250)" to access this
unit.
In these operating instructions, the settings are performed on Windows XP as examples. Refer to the operating
instructions of the respective OS for further information.
Содержание WJHD309A - DIGITAL DISK RECORDER
Страница 2: ...2...
