Panasonic WJHD309A - DIGITAL DISK RECORDER, Инструкции по настройке сети

Страница: 84 / 115

84
Settings for communication with other devices [Comm]
It is required to apply the same settings, for example, the communication speed, the communication protocol, etc. to
the external devices such as a controller connected to the DATA port or the serial port (RS232C).
It is also required to perform the network settings such as the IP address, the gateway address, etc. when operating
this unit using a PC via a network such as a LAN.
Perform the required settings for communicating with external devices.
Perform the communication settings for camera control [Camera Control]
Perform the communication settings for each camera channel to control cameras.
Screenshot 1
Start operation after the submenu of the communication
menu is displayed by clicking the [Comm] button in the
setup menu (Advanced). (page 15)
Step 1
Click "Camera Control".
Notes:
• Perform the settings in accordance with cameras
connected to this unit.
• Perform the settings for each of the 4 cameras for
CAM 9-16.
• To control cameras with the coaxial cable, connect
cameras to the video input connectors 1-8 (compati-
ble with coaxial cable communication). Use a
Panasonic data multiplex unit to control cameras
connected to other camera channels with coaxial
cables.
In this case, select "PSD" for the communication
method of the camera to be controlled via the data
multiplex unit.
• Set the unused camera channels to OFF.