Panasonic WJHD309A - DIGITAL DISK RECORDER, Инструкции по настройке сети

Страница: 96 / 115

96
Screenshot 2
The "Network SNMP Setup" menu will be displayed.
Note:
The following characters can be entered:
A B C D E F G H I J K L M N O P Q R S T U V W X
Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z 0 1
2 3 4 5 6 7 8 9 ! # $ % & ' ( ) * + , - . / : ; < = > ? @ [
¥ ] ^ _ ` { | } ~
Step 2
Perform the settings for the following items.
■
COMMUNITY
Enter a name used for SNMP authentication in alphanu-
meric characters. Enter up to 32 alphanumeric charac-
ters.
■
CONTACT
Enter the mail address of an administrator of this unit.
Enter up to 255 alphanumeric characters.
■
SYSTEM NAME
Enter a system name in alphanumeric characters to
manage this unit by the SNMP system, for example,
No1. Enter up to 255 alphanumeric characters.
■
LOCATION
Enter a location name (location where this unit is
installed) in alphanumeric characters, for example, 2F.
Enter up to 255 alphanumeric characters.
Step 3
Click the [SET] button after completing the settings.
Perform the settings for SNMP network [Network SNMP Setup]
Perform the settings for the SNMP. Perform the settings for the status check of the unit, etc. by connecting the
SNMP manager.
Screenshot 1
Start operation after the submenu of the communication
menu is displayed by clicking the [Comm] button in the
setup menu (Advanced). (page 15)
Step 1
Click "Network SNMP Setup".