Panasonic WJHD309 - DIGITAL DISK RECORDER Скачать руководство пользователя страница 106

Страница: 106 / 164

106

Recording Rate and Image Quality for Each
Camera Channel

Perform the settings for recording rate, image quality and
recording duration for each camera channel (only for pre-
event recording and post-event recording).
Perform the settings for each recording mode. Assign the
recording rate for each camera channel as described in
"Recording Rate for Each Recording Mode" above.
The following are for the recording rate. When OFF is
selected, images from the selected camera channel will not
be recorded.
OFF/0.1 ips/0.2 ips/0.3 ips/0.4 ips/0.5 ips/1 ips/1.7 ips/
2.5 ips/4.2 ips/5 ips/6.3 ips/8.3 ips/12.5 ips/25 ips/50 ips

AUTO:

The recording rate will be set automatically. (Not

possible for pre-event recording and post-event record-
ing)

Note:

When "AUTO" is selected for a camera channel, the

maximum recording rate of this camera channel will be
one of the following parameters but less than the value
resulting from the following formula.

Parameters:

0.1 ips/0.2 ips/0.3 ips/0.4 ips/0.5 ips/1 ips/2 ips/3 ips/
5 ips/6 ips/7.5 ips/10 ips/15 ips/30 ips/60 ips

Formula:

(Recording rate of each recording mode) – (Recording rate of
camera channels whose recording rate is numerically set (ips))

Number of camera channels whose recording rate is AUTO

However, when "FRAME 3D ON", "FRAME 3D OFF" or
"SIF" is selected, the maximum recording rate of this
camera channel will be up to 25 ips.

Important:

The total of the recording rates of camera channels in
the same recording mode must be less than the record-
ing rate as described in "Recording Rate for Each
Recording Mode" above.

Examples:

When selecting "FIELD" for resolution,

"12.5 ips" for manual recording, "12.5 ips" for sched-
ule recording, "25 ips" for event recording:
Total recording rates of CAM 1 - 16 (manual record-
ing): less than 12.5 ips
Total recording rates of CAM 1 - 16 (schedule
recording): less than 12.5 ips
Total recording rates of CAM 1 - 16 (event record-
ing): less than 25 ips

When the total of the recording rates becomes more than
the set value, the recording mode section will turn red.

The total of the recording rates between recording rates of
pre-event recording and recording rates of post-event
recording for each camera channel must be less than the
recording rate as described in "Recording Rate for Each
Recording Mode" above.

The following are available for the image quality.

SFA/SFB:

Top quality (SUPER FINE)

FQA/FQB:

High quality (FINE)

NQA/NQB:

Standard quality (NORMAL)

EXA/EXB:

Low quality (EXTENDED)

**A is suitable for less dynamic images.
**B is suitable for more dynamic images.

The following are available for the recording duration (only
event pre-recording and event post-recording).
1 s - 10 s (in 1 second intervals)
20 s/30 s/1 - 10 m (in 1 minute intervals)
20 - 60 m (in 10 minutes intervals)

MAN. (MANUAL):

The recording duration will be as follows

depending on the event type.

• At a motion detection: For 8 seconds
• At a video loss occurrence: During a video loss occur-

rence

• At a terminal alarm occurrence: During the supply of a

signal

• At a command alarm: For 8 seconds

CON. (CONTINUE):

Recording will be performed continu-

ously until the ALARM RESET button is pressed.

Notes: