89
Record images
Step 1
Display the top page of the operation window.
(
☞
Page 77)
Step 2
Click the [HDD] tab.
→
The [HDD] tab will be displayed.
Step 3
Click the [
D
] button in the [Rec] box.
Continue clicking the [
D
] button until the recording
button and the recording stop button appear.
→
The recording button will appear in the [Rec] box.
Step 4
Click the recording button
to start recording.
• At the default, images from all the connected
cameras will be recorded.
• When images are being recorded in the recording
mode with a higher priority than the manual
recording, the manual recording will not start until
the recording with a higher priority ends.
Refer to page 37 for further information about the
recording mode and their priorities.
→
When recording starts, the [REC] indicator in the
status display area will light red.
Step 5
To stop recording, click the stop recording
but-
ton.
→
The [REC] indicator in the status display area will
go off.
Note:
• When recording in a different recording mode is
being performed simultaneously, the [REC] indica-
tor will not go off since the recording in a different
recording mode will continue even when the man-
ual recording is stopped.
• No image will be recorded by the manual record
-
ing for a camera channel from which no video
input is sent. When video input is sent from the
camera channel, the manual recording will start
recording images from it.
Live images can be recorded on the recorder. Images from up to 16 cameras can be recorded on a single
recorder.
Record images (Manual recording)
Recording can be started and stopped manually.
