63
6 9 0 I N I T I A L I Z E
S Y S T E M : E X E C
D I R E C T O R Y : E X E C
↑ ↓
: M O V E E N T : E X E C E S C : P R V
6 8 0 M O D E D I S P .
S E N D I N G M O D E :
H 2 6 3
C I F
G 7 2 8
L S D 6 . 4 K
R E C E I V I N G M O D E :
H 2 6 3
C I F
G 7 2 8
L S D 6 . 4 K
E S C : P R V
●
Mode Verification [680]
●
Initialize [690]
Video compression system (H263: High quality mode; H261:
Standard mode)
Motion resolution (CIF: High resolution; QCIF: Low resolution)
Audio quality (G.722: High quality mode; G.728: Standard mode)
Data communication mode
1
Move the cursor to the item to initialize.
SYSTEM:
All the settings (except the directory) are ini-
tialized.
DIRECTORY:
All the quick dial numbers registered in
the directory are cleared.
2
Press the ENTER button to initialize.
The verification message appears. Move the cursor to
[YES] and press the
ENTER
button to initialize, or to [NO]
and press the
ENTER
button not to initialize.
When initializing is over, the message
[
■
POWER OFF
THEN POWER ON AGAIN]
appears.
3
When the message appears, switch power
off.
When the power is switched back on, the AV Codec is
restarted under the initialized conditions. Set the necessary
items again.
■
I N I T I A L I Z E S Y S T E M C O N G I G ?
I F S E L E C T I N G Y E S A N D P R E S S I N G E N T ,
S Y S T E M C O N F I G W I L L B E I N I T I A L I Z E D .
Y E S N O
← →
: S E L E C T E N T : E X E C E S C : P R V
d
OR
• The AV Codec cannot be initialized during communi-
cation.
• To initialize both the system and the directory, repeat
steps 1 to 3 for each of them.
• Never turn the power off while the system or the
directory is being initialized.
Power may be turned off after the message
[
■
POWER OFF THEN POWER ON AGAIN]
appears.
Notes
■
C L E A R D I R E C T O R Y R E G I ?
I F S E L E C T I N G Y E S A N D P R E S S I N G E N T ,
D I R E C T O R Y W I L L B E C L E A R .
Y E S N O
← →
: S E L E C T E N T : E X E C E S C : P R V
d
■
P O W E R O F F T H E N P O W E R O N A G A I N
