background image

53

Menu Password Setup [492]

This menu lets you set a new password or change a password.

    4 9 0   L O C K / M E N U   P A S S W O R D

      4 9 1   L O C K

      4 9 2   M E N U   P A S S W O R D

     

     

↑ ↓

: M O V E   E N T : S E L E C T   E S C : P R V

    4 9 2   M E N U   P A S S W O R D

      E N T E R   C U R R E N T   P A S S W P R D     . . . .
       
       

      P A S S W O R D   E R R O R

      E N T : E X E C   D E L : B S   E S C : P R V

    4 9 2   M E N U   P A S S W O R D

      E N T E R   N E W   P A S S W P R D           . . . .
       
       

     

      E N T : E X E C   D E L : B S   E S C : P R V

    4 9 2   M E N U   P A S S W O R D

      R E - E N T E R   N E W   P A S S W P R D       . . . .
       
       

       

      E N T : E X E C   D E L : B S   E S C : P R V

1

Move the cursor to item 492 by pressing the

or 

button. Then press the ENTER button.

The 

[492 MENU PASSWORD]

menu appears on the moni-

tor screen.

2

Enter the 4-digit password by pressing the
numeric buttons. Then press the ENTER
button.

• The menu 

[CURRENT PASSWORD] 

appears on the

monitor screen when a password was previously set in
the system.
If the password is correct, then the next menu 

[NEW

PASSWORD]

will appear on the monitor screen to

change the password.
If the password is not correct, then 

[PASSWORD

ERROR]

appears on the monitor screen. To try to enter

password again.

• If no password has been set (when the product is pur-

chased or after the system is initialized), then the next
menu appears without displaying this menu.

3

Enter a new 4-digit password by pressing the
numeric buttons. Then press the ENTER
button.

• Enter a new password and then press the 

ENTER

but-

ton.
The next menu appears on the monitor screen for verifi-
cation.

• Write down the entered password in your notebook, for

example, so that you do not forget it.
If you forget your password, menu operation will be
impossible.

4

Enter a new password again for verification.

When the entered password is correct, the screen returns
to the previous 

[490 LOCK / MENU PASSWORD]

menu.

d

d

d

Shown if the entered
password is different.

Содержание WJ-AV20

























































































Отзывы: