Panasonic WH-ADC0309J3E5, Планирование и руководство по установке

Страница: 150 / 224

150
Aquarea air-to-water heat pumps - Planning and installation manual - 02/2022
Installation
6
Transport and handling of the devices
CAUTION
Danger of injury due to carrying of heavy loads
As the devices are very heavy, they must always be carried by at least two persons, otherwise
there is a danger of injury due to overloading.
► Deploy as many persons as necessary to carry the devices in order to avoid injuries and
physical overloading.
► Use mechanical hoists for loads that are too heavy to lift.
Observe the following instructions for transporting and handling the devices.
1. Transport the devices with caution, so that they are not damaged. Special caution is
necessary when lowering and moving the outdoor units and mono-bloc units at the
installation location.
2. Remove the packaging material only when the devices have been placed at the desired
installation location.
3. Depending on the weight of the devices (→
4.6.2.3 Technical Data (bi-bloc systems),
p. 40
, →
4.6.3.3 Technical Data (mono-bloc systems), p. 55
) you will need two to four
persons and/or a suitable mechanical hoist.
Examples of transport:
Outdoor unit or mono-bloc unit
Large, heavy devices should only be moved by means of appropriate hoists.
The hoists can be attached by lugs on the base construction of the device.
All in One indoor unit
The All in One unit can be transported in a horizontal or vertical position.
If it is transported in a horizontal position, the front side of the packaging materi-
al (with the word “FRONT” printed on it) must face upwards.
If it is transported in a vertical position, grip inside the hand holes on the sides
and push the device into the desired position.
4. Also align the devices absolutely horizontally when setting on an uneven surface. For this
purpose, you can use the adjustable feet, for example, which are included in the scope of
delivery of All in One units.