Panasonic WH-ADC0309J3E5, Планирование и руководство по установке

Страница: 59 / 224

59
Aquarea air-to-water heat pumps - Planning and installation manual - 02/2022
Product Description
4
Mono-bloc systems | Aquarea HT | G Generation | Single Phase | Heating only | R407C
Single phase
Outdoor unit WH‑MHF09G3E5 WH‑MHF12G6E5
Heating capacity / COP (A +7 °C, W 35 °C) kW / – 9.00 / 4.64 12.00 / 4.46
Heating capacity / COP (A +7 °C, W 65 °C) kW / – 9.00 / 2.48 12.00 / 2.41
Heating capacity / COP (A +2 °C, W 35 °C) kW / – 9.00 / 3.45 12.00 / 3.26
Heating capacity / COP (A +2 °C, W 65 °C) kW / – 9.00 / 2.06 10.30 / 2.01
Heating capacity / COP (A -7 °C, W 35 °C) kW / – 9.00 / 2.74 12.00 / 2.52
Heating capacity / COP (A -7 °C, W 65 °C) kW / – 9.00 / 1.79 9.60 / 1.77
ErP data for Space Heating
Average climate
Seasonal energy efficiency (ηs,h) W35 / W55 % 153 / 125 150 / 125
SCOP W35 / W55 3.90 / 3.20 3.82 / 3.21
Energy class
1
W35 / W55 A++ / A++ A++ / A++
Warm climate
Seasonal energy efficiency (ηs,h) W35 / W55 % 191 / 156 188 / 156
SCOP W35 / W55 4.84 / 3.97 4.77 / 3.97
Energy class
1
W35 / W55 A+++ / A+++ A+++ / A+++
Cold climate
Seasonal energy efficiency (ηs,h) W35 / W55 % 137 / 116 134 / 113
SCOP W35 / W55 3.50 / 2.97 3.42 / 2.90
Energy class
1
W35 / W55 A+ / A+ A+ / A+
Sound power
2
dB(A) — —
Dimension H x W x D mm 1,410 x 1,283 x 320 1,410 x 1,283 x 320
Net weight kg 151 151
Refrigerant (R407C) / CO
2
Eq.
3
kg / t 1.92 / 3.406 1.92 / 3.406
Water pipe connector Inch R 1¼ R 1¼
Pump
Number of speeds 7 7
Input power (Min / Max) W — —
Heating water flow (∆T=5 K. 35 °C) l/min 25.8 34.4
Capacity of integrated electric heater kW 3 6
Input power kW 1.94 2.69
Running and starting current A 9.3 12.8
Current 1 A 28.5 29.0
Current 2 A 13.0 26.0
Recommended fuse A 30 / 30 30 / 30
Recommended cable size, supply 1 / 2 mm² 3 x 4.0 or 6.0 / 3 x 4.0 3 x 4.0 or 6.0 / 3 x 4.0
Operation range
Outdoor ambient Heat °C -20 ~ +35 -20 ~ +35
Water outlet Heat °C 25 ~ 65 25 ~ 65
1 Scale from A+++ to D.
2 Sound power in accordance to 811/2013, 813/2013 and EN12102-1:2017 at +7 °C.
3 WH-MHF models are hermetically sealed.
Note:
EER and COP calculation is based in accordance to EN14511.
4.7 Control
4.7.1 Remote controller
The Aquarea heat pumps can be operated and programmed through the remote controller included
in the scope of delivery. The remote controller has a display for showing the most important
operating parameters and various control buttons for retrieving, setting, activating and deactivating
the control functions.
To combine the Aquarea heat pumps with external devices such as a solar system or
a room thermostat, the remote controller is equipped with the requisite interfaces. The
corresponding functions are only available if the accessories in question are connected and
activated (→ 4.7.2 External interfaces (inputs/outputs), p. 65 , → 4.8 Accessories, p. 72 ,
→ 6.8.2 Connecting accessories, p. 181 ).
In the case of bi-bloc systems, the remote controller is integrated into the hydrokit or All in One
unit, but can be removed from the device to another room for separate installation. In the case of
mono-bloc systems, the remote controller is always installed separately in the building. The method
for installing the remote controller is identical in both cases (→
6.8.3 Installing and connecting the
remote controller, p. 184
).
Depending on the device generation (F, G, H, J ...), the heat pumps are equipped with various
remote controllers that provide different functions.
While the same remote controller is used for all models of one generation, all functions of the
remote controller are not directly available for all models of that generation. (For example, the
domestic hot water mode is directly available in bi-bloc systems with All in One unit having an
internal domestic hot water tank, while in bi-bloc systems with standard hydrokit and external
16.07.2021, cH
Is it true that “the same controller is used for all
models of one generation”, or are there any excep-
tions?
25.02.2022, cH
no answer