45
Note
:
•
Disc cannot be inserted or removed unless the battery or
AC adaptor/charger is connected to DVD Video Camera.
•
If there is some delay before recording starts, refer to
“Check 4” on page 139.
•
The disc insertion orientation is specific. Forcibly
inserting a disc in the wrong orientation could damage
the DVD Video Camera or disc.
•
If the disc is not correctly inserted, the cover will not close.
Never try to forcibly close the cover: this could cause
damage. Reinsert the disc properly.
•
If a single-sided disc is inserted into DVD Video Camera
with the printed label facing the inside, an error message
will appear. Remove the disc and reinsert it with its
recording/playback side facing the inside. See “Trouble
Messages” on page 141.
•
Do not allow the recording/playback side to become dirty
or scratched.
•
When using double-sided disc
Recording is possible on both sides of double-sided disc.
However, when recording or playback on one side is
finished, recording or playback will not move
automatically to the other side. Remove the disc once
from the DVD Video Camera, turn over the disc and insert
it again for continued use.
z
When using brand-new DVD-R disc
Recognition of the disc will
start.
The messages on the right
will appear in sequence by
pressing the
A
button
between messages.
When recording on this
DVD Video Camera:
When first message “Format
the disc now?” appears,
choose “YES” and then
press the
A
button. The
disc will be formatted.
When formatting is
complete, “DVD-R disc,
Video mode cannot be
changed” will appear (See
page 145): After confirming
the contents, press the
A
button to erase the
message.
Once formatted, a DVD-R
disc can no longer be
changed to a disc for PC, even if it has not been
recorded on this DVD Video Camera.
Note
:
See page 78 for movie quality mode.
When recording data from PC:
While the above messages are being displayed,
press the
C
button, or when message “Format the
disc now?” appears, choose “NO” and then press
the
A
button.
If data from PC has not yet been recorded, the disc
can be made usable on this DVD Video Camera.
When inserting the disc into this DVD Video
Camera, the same message will appear: If you wish
to use it on this DVD Video Camera, choose “YES”.
Note
:
Do not initialise a disc on which you wish to record data
created using the application (DVDfunSTUDIO) of PC.
NEXT
F o r ma t D i s c
CANCEL
D i s c i s n o t f o r m a t t e d .
I f i t f o r m a t s , i t b e c o m e s
p o s s i b l e t o u s e f o r c a m e r a .
ENTER
Format the disc now?
Format Disc
YES
NO
NEXT
H o w e v e r , w h e n y o u r e c o r d
f r o m P C c o n n e c t i o n
t e r m i n a l ,
p l e a s e d o n o t f o r m a t .
F o r ma t D i s c
CANCEL
VDR-M75M55EB.book Page 45 Tuesday, May 17, 2005 10:32 AM
