23
3
Start recording (P. 49).
1.Open the LCD monitor (See page 36).
2.Set the switch to “
” or “
” while pressing
down on the button to the right of the power
switch.
3.Set the LOCK switch to
(to the upper left)
to prevent accidental switching of recording
mode.*
* Only in
mode.
4.Press the REC button to record movie, or
press the Photo shot button to record stills.
Recording will start.
Pressing the REC button again will stop
recording.
Rotate
While pressing
Align with this position
Photo shot button
REC button
Note
:
When using an unformatted disc, format (initialize) it on this DVD Video Camera.
If unformatted disc is inserted into this DVD Video Camera, a message will appear: Format the disc following the
instructions on screen (P. 45, 118). Initializing the disc will erase all the recorded contents: Make sure the contents
on disc are not valuable before initializing the disc.
4
View the playback of recorded content on LCD monitor screen.
1.Open the LCD monitor (See page 36).
2.After recording is finished, press the
A
button.
The recorded scene will be played back.
3.Press the
g
button to stop playback.
VDR-M75M55EB.book Page 23 Tuesday, May 17, 2005 10:32 AM
