EN12
Attaching the Bypass Selector (continued)
Faucet without an aerator
• Water faucet which can attach the
Alkaline Ionizer with accessory.
Bulge
more than 10 mm
13 mm or more, less than 24 mm
1
Remove the mounting nut and
adaptor.
When the fi lter or gasket washer (made
of metal) drops off , please return to the
original position (P. EN34).
Make sure any foreign matter is not
attached on the end of the faucet and
gasket inside of the bypass selector.
Mounting nut
Adaptor
Gasket
Do not remove the gasket washer
inside the bypass selector.
If it is moved, return to the
original position.
Make sure foreign matter is
not attached to the fi lter and
the gasket is not inclined.
Filter
Gasket
washer
2
Insert the installation adaptor,
and tighten it with the mounting
nut.
Mounting nut
Remove the screws
(4 pcs.)
Installation adaptor
(Accessory)
3
Tighten the 4 screws temporarily
and loosen the mounting nut to
leave a 3 ~ 4 mm gap.
Mounting nut
3 ~ 4 mm
Screws
(4 pcs.)
4
Push the bypass selector against the faucet
and install the 4 screws as shown below.
Top view
Water faucet
Installation adaptor
Screws
Water faucet
Bypass selector
5
Tighten the mounting unit until
the bypass selector does not turn.
Do not use any tools. (This may
damage the mounting nut.)
Make sure the bypass selector is
not inclined.
Mounting nut
TK-AS66-ZEX̲En.indb 12
TK-AS66-ZEX̲En.indb 12
2017/01/30 15:04:13
2017/01/30 15:04:13