Panasonic TK-AS66-ZEX Скачать руководство пользователя

Страница: 10 / 52

EN10

Attaching the Bypass Selector

Keep all parts that are not used during installation, as they may be needed later if the unit is moved or the faucet
is changed.

Outside-screwed faucet

• Water faucet which can attach the Alkaline

Ionizer without an accessory.

Remove the mounting nut and
adaptor.



When the ﬁ lter or gasket washer (made
of metal) drops oﬀ , please return to the
original position (P. EN34).



Make sure any foreign matter is not
attached on the end of the faucet and
gasket inside of the bypass selector.

Mounting nut

Adaptor

Gasket

Do not remove the gasket washer
inside the bypass selector.
If it is moved, return to the
original position.
Make sure foreign matter is
not attached to the ﬁ lter and
the gasket is not inclined.

Filter

Gasket

washer

Attach the mounting nut and
adaptor.

Mounting nut

Gasket

Adaptor

Attach the bypass selector and
tighten the mounting unit until
the bypass selector does not
turn.



Do not use any tools. (This may
damage the mounting nut.)



Make sure the bypass selector is
not inclined.

Bypass selector

Mounting nut

Aerator (not used)



Do not use the
removed aerator.

TK-AS66-ZEX̲En.indb 10

2017/01/30 15:04:12

Содержание TK-AS66-ZEX





















































Результаты поиска

Содержание TK-AS66-ZEX

Отзывы:

Похожие инструкции для TK-AS66-ZEX

Бренды по названию

Популярные бренды

Panasonic TK-AS66-ZEX, Инструкция по эксплуатации

Результаты поиска

Содержание TK-AS66-ZEX

Отзывы:

Похожие инструкции для TK-AS66-ZEX

Бренды по названию

Популярные бренды