Panasonic TK-AS66-ZEX Скачать руководство пользователя

Страница: 11 / 52

EN11

Engli

Inside-screwed faucet

• Water faucet which can attach the Alkaline

Ionizer with an accessory.

Aerator (not used)



Do not use the removed aerator.

Remove the mounting nut and
adaptor.



When the ﬁ lter or gasket washer (made
of metal) drops oﬀ , please return to the
original position (P. EN34).



Make sure any foreign matter is not
attached on the end of the faucet and
gasket inside of the bypass selector.

Mounting nut

Adaptor

Gasket

Do not remove the gasket washer
inside the bypass selector.
If it is moved, return to the
original position.
Make sure foreign matter is
not attached to the ﬁ lter and
the gasket is not inclined.

Filter

Gasket

washer

Screw in the bushing. Insert into
the adaptor.

Bushing (Accessory)

Gasket

Adaptor

Attach the mounting nut and
adaptor.



The adaptor should be screwed on
straight. Screwing it on tilted may
strip the threads, resulting in water
leaks.

Mounting nut

Gasket

Adaptor

Attach the bypass selector and
tighten the mounting unit until
the bypass selector does not
turn.



Do not use any tools. (This may
damage the mounting nut.)



Make sure the bypass selector is
not inclined.

Mounting nut

Bypass selector

TK-AS66-ZEX̲En.indb 11

2017/01/30 15:04:13

Содержание TK-AS66-ZEX





















































Результаты поиска

Содержание TK-AS66-ZEX

Отзывы:

Похожие инструкции для TK-AS66-ZEX

Бренды по названию

Популярные бренды

Panasonic TK-AS66-ZEX, Инструкция по эксплуатации

Результаты поиска

Содержание TK-AS66-ZEX

Отзывы:

Похожие инструкции для TK-AS66-ZEX

Бренды по названию

Популярные бренды