Panasonic TH-43EQ2W Скачать руководство пользователя страница 88

Страница: 88 / 178

English

■

[Button lock]

Limits operation of the buttons on the unit.

[Off]:

All the buttons on main unit can be used.

[On]:

All button operations except for the <Main Power

On / Off button> are disabled.

[MENU & ENTER]:

Locks <MENU (Unit)> and <ENTER (Unit)>

buttons.

To set [Button lock]

Set with the buttons on the unit.

[Off]:

   Press  <+ (Unit)> for 4 times.
   Press  <INPUT (Unit)> for 4 times.
   Press  <- (Unit)> for 4 times.
   Press  <ENTER (Unit)>.

[On]:

   Press  <- (Unit)> for 4 times.
   Press  <ENTER (Unit)> for 4 times.
   Press  <+ (Unit)> for 4 times.
   Press  <ENTER (Unit)>.

[MENU & ENTER]:

   Press  <ENTER (Unit)> for 4 times.
   Press  <+ (Unit)> for 4 times.
   Press  <INPUT (Unit)> for 4 times.
   Press  <ENTER (Unit)>.

Note

●

About how to reset the settings to defaults, refer to

“Initialization”. (see page 170)

■

[POWER button lock]

Sets the lock setting for the display <Main Power On /

Off button>.

[Off]:

<Main Power On / Off button> operation is

enabled.

[On]:

<Main Power On / Off button> operation is

disabled.

■

[Controller user level]

Limits operation of the buttons on the remote control.

[Off]:

You can use all of the buttons on the remote

control.

[User1]:

You can only use <Standby (ON/OFF) button>,

<INPUT>, <RECALL>, <MUTE>, <VOL +> and

<VOL -> buttons on the remote control.

[User2]:

You can only use <Standby (ON/OFF) button> on

the remote control.

[User3]:

Locks all the buttons on the remote control.

Note

●

About how to reset the settings to defaults, refer to

“Initialization”. (see page 170)

SLOT settings

Set for SLOT.
This menu is displayed only when a function board is

inserted into the SLOT.

[SLOT settings] - submenu screen

SLOT settings

SLOT power link

Off

SLOT power on

SLOT forced termination

SLOT information

SLOT standby

■

[SLOT information]

Displays the information of the function board inserted

to the SLOT.

■

[SLOT power link]

Links the power operation of the SLOT with the power

operation of this unit.

[Off]:

Does not link.

[On]:

The power of the unit is turned off when the power

of the inserted function board is turned off during

SLOT input or enters the power save mode. After

that, when the power of the function board is

turned on or returns from the power save mode,

the power of the unit is turned on.

Note

●

When [HDMI-CEC control] is set to [Enable], this

menu will be greyed out and cannot be set. (see page

65)

●

When the DIGITAL LINK Terminal Board is attached,

[SLOT power link] is grayed out and cannot be set.

Содержание TH-43EQ2W



















































































































































































Результаты поиска

Содержание TH-43EQ2W

Отзывы:

Похожие инструкции для TH-43EQ2W

Бренды по названию

Популярные бренды

Panasonic TH-43EQ2W, Руководство по эксплуатации

Результаты поиска

Содержание TH-43EQ2W

Отзывы:

Похожие инструкции для TH-43EQ2W

Бренды по названию

Популярные бренды