Panasonic TH-42AF1U Скачать руководство пользователя страница 35

Страница: 35 / 123

English

Basic Controls

Remote Control Sensor /

Power Indicator

Main Power On / Off button
(Back of the unit)

AC socket outlet

AC cord (supplied)

Operate pointing the remote control directly at

the unit’s Remote Control Sensor.

Note

●

For normal use, pull out the remote control sensor

from the edge side of the main unit by operating the

lever on the rear panel. (see page 32)

●

Do not put an obstacle between the remote control

sensor of the main unit and the remote control.

●

Operate the remote control in front of the remote

control sensor or from the area where the sensor can

be seen.

●

When directly aiming the remote control at the remote

control sensor of the main unit, the distance from

the front of remote control sensor should be approx.

7 m or less. Depending on the angle, the operation

distance may be shorter.

●

Do not subject the remote control sensor of the main

unit to the direct sunlight or strong fluorescent light.

Connect the AC cord plug to the

Display.

(see page 18)

Connect the plug to the socket outlet.

Note

●

Main plug types vary between countries. The

power plug shown at left may, therefore, not be the

type fitted to your set.

●

When disconnecting the AC cord, be absolutely

sure to disconnect the AC cord plug at the socket

outlet first.

●

The settings may not be saved if the power plug is

disconnected immediately after changing settings

with on-screen menu. Disconnect the power plug

after a enough period of time. Or, disconnect the

power plug after turning the power off with the

remote control, RS-232C control or LAN control.

Press the <Main Power On / Off

button> on the unit to turn the set on:

Power-On.

●

Power Indicator: Green (Picture is displayed.)

●

When the power of the unit is ON, remote control

operation is possible.

■

To turn the power ON/OFF with the remote

control

Press the <Standby (ON/OFF) button> to turn the

Display on.

•

Power Indicator: Green (Picture is displayed.)

Press the <Standby (ON/OFF) button> to turn the

Display off.

When [OpenPort PLATFORM standby] is set to [Off]

•

Power Indicator: Red (standby)

When [OpenPort PLATFORM standby] is set to [On]

•

Power Indicator: Orange (Red/Green) (standby)

(About [OpenPort PLATFORM standby] settings, see

page 84.)

■

To turn the power OFF with the <Main

Power On / Off button>

●

When the power of the unit is ON (Picture is

displayed: Power indicator in green):
Pressing the <Main Power On / Off button> will

illuminate the power indicator in orange. When it goes

off, the display unit turns off.
While the indicator is illuminating in orange, the

remote control operation is ignored.

Содержание TH-42AF1U




























































































































Результаты поиска

Содержание TH-42AF1U

Отзывы:

Похожие инструкции для TH-42AF1U

Бренды по названию

Популярные бренды

Panasonic TH-42AF1U, Руководство по эксплуатации

Результаты поиска

Содержание TH-42AF1U

Отзывы:

Похожие инструкции для TH-42AF1U

Бренды по названию

Популярные бренды