5
Basic Instructions for the Use of This Product
For inspection and/or repair, consult the retailer.
Use commercial power supply from a wall socket, which is close and easily accessible
to this Switching Hub.
Unplug the power cord when installing or moving this Switching Hub.
Unplug the power cord when cleaning this Switching Hub.
Use this Switching Hub within the specifications. Deviation could lead to malfunction.
When installing this Switching Hub using rubber feet (with built-in magnets), confirm
that it does not move or fall down due to weight of cables.
When connecting a cable, hold the Switching Hub firmly.
If you install this Switching Hub at a high place, securely fix it on the wall with screws.
If you install this Switching Hub at a high place with magnets alone, it may fall,
leading to injury or failure of this Switching Hub.
Do not put a floppy disk or a magnetic card near the rubber feet (with built-in
magnets). Otherwise, recorded content may be lost.
After installing this Switching Hub on an OA desk, do not move either without
dismounting it. Otherwise, the desk surface may be damaged.
Do not touch the metal terminal of the RJ45 connector, the modular plug of
connected twisted pair cable. Do not place charged objects in the proximity of them.
Static electricity could lead to equipment failure.
Do not put the modular plug of the connected twisted pair cable on objects that can
carry static charge, such as carpet. Do not place it in the proximity. Static electricity
could lead to equipment failure.
Do not put a strong shock, including dropping, to this Switching Hub. Deviation could
lead to equipment failure.
Before connecting a console cable to the console port, discharge static electricity, for
example by touching metal appliance (do not discharge by touching this Switching
Hub).
Do not store and/or use this Switching Hub in the environment with the
characteristics listed below.
(Store and/or use this Switching Hub in the environment in accordance with the
specification.)
- High humidity. Possible spilled liquid (water).
- Dusty. Possible static charge (such as carpet).
- Under direct sunlight.
- Possible condensation. High/low temperature exceeding the specifications
environment.
- Strong vibration and/or strong shock.
Please use this Switching Hub in places where the ambient temperature is in the
range from 0 to 40 degrees C. You can use it in places where the ambient
temperature is in the range from 0 to 50 degrees C if you set the fan speed to High or
