11
1
1
.
.
P
P
r
r
o
o
d
d
u
u
c
c
t
t
O
O
u
u
t
t
l
l
i
i
n
n
e
e
Switch-M8ePWR is a Layer-2 Ethernet Switching Hub with management function
having 8 ports of 10BASE-T/100BASE-TX supporting IEEE802.3af PoE power
supply function, and 2 ports of 10BASE-T/100BASE-TX/1000BASE-T and SFP
extension slot, one of which is selectable. All are twisted pair ports corresponding
to auto negotiation.
1.1. Features
This Switching Hub can supply power conforming with IEEE802.3af. Supplying
power up to 15.4 W per port, and up to 124 W in total is possible.
Ports 1 to 8 are set at MDI-X (default) to prevent a loop failure.
The loop detection function can prevent a loop failure by automatically
blocking a port when a loop occurs.
The Loop History function allows to identify the port by referring to the loop
event notification on the LED and the occurrence history on the configuration
screen.
The ECO mode LED function can save more power consumption by turning off
the LEDs on the Switching Hub.
All twisted pair ports support the straight/cross cable auto sensing function.
Simply connect devices with straight cables, whether it is a terminal or a
network device. (This function does not work if the port communication
configuration is set at fixed. Ports 1 to 8 are set at MDI-X. (default))
Ports 1 to 8 are 10/100BASE-TX ports corresponding to auto negotiation.
Ports 9 and 10 can be used as a 10/100/1000BASE-T port corresponding to
auto negotiation or an SFP extension slot exclusively. The speed and
communication mode can be set at fixed.
The MNO series power saving mode detects the connection status
automatically and saves power consumption to minimum.
Telnet/SSH functions allow remote configuration changes and verifications of
the Switching Hub.
Remotely configure the PoE settings for each port (Ports 1 to 8).
The Ping command can be used to verify communications.
The standard MIB (MIB II) is supported, allowing to manage the Switching
